TP-Link TL-WR941ND revert ?


沒想到po出上一篇之後,竟然變成我的Blog最主要流量的來源(佔20%)

好吧那就再來些情報提供:
OpenWRT的資訊頁在這
http://klseet.com/index.php?option=com_content&view=article&id=129&Itemid=114

為什麼要特別提呢?因為裡面有OpenWRT revert 到原廠韌體的方法
然後我愛用的Gargoyle 基本上是based on OpenWRT (只有GUI不同)

In case you need to restore back to stock firmware, follow the steps below:

  1. Download the stock firmware which has the “xxxx-up-xxx" word on it, DO NOT use the stock firmware with “xxx-boot-xxx" word on it !!
  2. Login to the current OpenWRT, reset to default
  3. Login to the OpenWRT default 192.168.1.1 without any password, upgrade to the stock “xxx-up-xxx" firmware

Login to the device, go to the following section, click Perform Reset to reset the device back to default

DO NOT touch anything until the process is completed !!

Once the device reset back to default, login to the device IP 192.168.1.1, username is “root" with no password

Go to the following section, browse the downloaded stock firmware “xxx-up-xxx" (DO NOT use xxx-boot-xxx stock firmware !!), click Flash Image to revert

DO NOT touch anything until the process is completed !!

Note: When you see the device’s all lights blink once, unplug the LAN cable, close the browser, wait at least 1 min before connect to the device again.

Login to the device IP 192.168.1.1, stock default username & password is “admin"

Device restored back to stock successfully !

.

圖就不備份了
簡單的說就是還原預設值,然後使用原廠帶up字眼的韌體升級(千萬不要用有boot的韌體)
好像跟原廠韌體升級幾乎一模一樣 (這麼簡單啊?)
不過我自己還沒嘗試過 (請要試的人自己掌握風險)

順便情報提供,Gargoyle 已更新到 1.5.4
New in 1.5.4:

  • Bumps OpenWrt version to latest Backfire version for latest wireless fixes and support of multiple switch models in Buffalo WZR-HP-G300NH routers
  • New improved version of Active Congestion Controller. Paul has done OUTSTANDING work on this, and there is now fairly comprehensive QoS documentation on the wiki!
  • Implements ability to configure router as a Tor Relay/Bridge including ability to configure an Obfsproxy bridge (for routers that support Tor)
  • Implements ability to connect to Tor bridge (including Obfsproxy bridge) instead of directly to a relay (for routers that support Tor)
  • Allows monitoring of total Tor Bandwidth usage (for routers that support Tor)
  • Allows access to Tor hidden service addresses from all hosts (toggled and untoggled) when Tor is active and separately toggled for each host (for routers that support Tor)
  • Allows monitoring of bandwidth to/from router itself, which was before included in the “Total" categories, but not recorded seperately
  • Option to attempt to save configuration when upgrading. Some versions may still be incompatible.
  • Fixes monitoring of web history/searches for ranges of IPs
  • Some fixes for mounting/formatting of USB drives
  • Fixes security issue — bandwidth.csv is no longer visible if not logged in
  • Adds two new optional date formats: dd.mm.yy and yyyy-mm-dd
  • Enable ps wide output in busybox — allows more accurate listing of running processes when logged in via SSH
  • Sets cron loglevel to 9 so syslog doesn’t show every time a cronjob runs (which can quickly clutter up the system log)

New in 1.4.7:

  • Bumps OpenWrt version to latest Backfire version for latest wireless fixes and support of multiple switch models in Buffalo WZR-HP-G300NH routers
  • Fixes monitoring of web history/searches for ranges of IPs
  • Fixes security issue — bandwidth.csv is no longer visible if not logged in
  • Enable ps wide output in busybox — allows more accurate listing of running processes when logged in via SSH

發表迴響

在下方填入你的資料或按右方圖示以社群網站登入:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / 變更 )

Twitter picture

You are commenting using your Twitter account. Log Out / 變更 )

Facebook照片

You are commenting using your Facebook account. Log Out / 變更 )

Google+ photo

You are commenting using your Google+ account. Log Out / 變更 )

連結到 %s

%d 位部落客按了讚: